0 V
Steady Voltage Output
0 A
Maximum Output Current
0 W
Maximum Output Power
< 0 ms
Switch Over Time

Layers of battery protection

hashwhy™ comes with over voltage protection, over current protection, deep discharge protection and short circuit protection to safe guard your device and the lithium ion cells in case of any malfunction.

BIS Certified Batteries

Short Circuit Protection

Over Heat Protection

ESD Protection

Plug-n-Play

2.1mm DC Port

ABS Enclosure

Smart Charging

Smart Switch Over

hashwhy™ 12V 2A MicroUPS comes with a fast switch over and intelligent charging. When there is enough power available, the MicroUPS will charge itself while powering the output from the adapter. When the power goes off, the MicroUPS will switch it’s power source to battery with <1ms delay, to keep the device being powered always ON.

Smart Charging

MicroUPS is designed to be always plugged in. Since you need uninterrupted power supply 24×7, we have incorporated smart charging for the device. This means that, the IC inside the MicroUPS senses the battery voltage. It has algorithms inside, which tells the charging IC to charge the battery only when the battery voltage is low. When the battery is fully charged, the charger IC stops charging the battery completely. This ensures that the battery undergoes very less charge cycles, improving the life of battery and the device. The charging LED indicator shows if the device is charging the battery.

Doubles as voltage stabilizer

Some adapters age over time, and give our lower voltages. This results in inferior performance for the device. MicroUPS ensures that your device gets stable power. hashwhy MicroUPS has in-built voltage stabilisation inside, which will ensure that the device gets stable voltage, even if the adapter voltage drops down or even if there are little voltage fluctuations. This ensures that your device gets a stable voltage, increasing the life and performance of your device

Adapter cable compensastion

When you have to draw longer cables to connect to your device, the voltage drops on your cable. This means that the MicroUPS and the device which is connected to MicroUPS gets a lower voltage. hashwhy MicroUPS has in-built adapter cable compensation, to increase the voltage to stable 12V. This ensures a superior performance for you device. This compensation doesn’t use battery power, but only adapter power. This ensures longer battery life for the product as well.

Superb value for money

We believe that you deserve a value for money product because all money is hard earned. MicroUPS 10,000mAh offering is the best in class value for money offering. Consider you spend Rs.1500 on a 2000mAh product. You end up spending Rs.  ( 1500 / 2000 ) per mAh of battery capacity, which comes to about Rs. 0.75 per mAh of battery backup capacity. hashwhy MicroUPS 12V 2A 10000mAh is the value for money offering, as it gives you as low as Rs. 0.19/mAh of battery capacity. Lithium ion batteries also age with charge and discharge cycles. A 10000mAh device ensures that you have enough power backup left after years of usage.

0 mAh
Max Battery Capacity
Rs. 0
per mAh onwards
0 %
Extra backup duration
0 x
Battery Capacity

Expected Power Backup Duration

12V 2A 5000mAh
Expected Power Backup for Routers & Modems

Given below are the expected power backup when hashwhy MicroUPS 12V 2A 5000mAh is used with routers and modems of the current rating given below. For instance, when hashwhy MicroUPS 12V 2A 5000mAh is used with a 12V 2A router, for instance the Jio FTTH router, the average expected power backup is 3 hours. This duration is dependent on the power consumption of the router and can vary depending on the power consumed. Below mentioned are the average results obtained when using the MicroUPS with routers of the mentioned ratings.

12V 2A - 3hours
12V 1.5A - 4hours
12V 1A - 5hours
12V 500mA - 6hours

12V 2A 10000mAh
Expected Power Backup for Routers & Modems

Given below are the expected power backup when hashwhy MicroUPS 12V 2A 10000mAh is used with routers and modems of the current rating given below. For instance, when hashwhy MicroUPS 12V 2A 10000mAh is used with a 12V 2A router, for instance the Jio FTTH router, the average expected power backup is 6 hours. This duration is dependent on the power consumption of the router and can vary depending on the power consumed. Below mentioned are the average results obtained when using the MicroUPS with routers of the mentioned ratings.

12V 2A - 6hours
12V 1.5A - 8hours
12V 1A - 10hours
12V 500mA - 14hours

Variants

0 mAh
Maximum Backup
0 mAh
Most Economical
Technical Specifications
Voltage Input
: 12V ± 10%
Battery Type
: Lithium Ion 18650 cells
Voltage Output
: 12V ± 10%
Maximum Output Current
: 2.1A
Switch over time
: < 1 ms
Input Port
: 2.1mm DC
Output Port
: 2.1mm DC
Indicators
: Charging & Output ON
ESD Protection
: IEC61000−4−2 Level 4, ±30 kV Contact Discharge
Enclosure Material
: ABS
Colour
: Black